Bell System BL106 Instrukcja Użytkownika Pobierz pdf (Strona 7)

CS106/BL106 Combined Door Entry and Coded Access

time period only. This time period can be determined by a time-clock or

manually via a key switch.

For example, with factory settings, the operation of code 1 is unrestricted

(Executive Code) whilst code 2 is restricted to when the time-clock input is

closed (Zone 1 - Staff Code).

Codes can also be programmed to operate during alternate shifts. e.g. code 1

operates when the time-clock input is open (Zone 2) and code 2 operates when

the time-clock input is closed (Zone 1).

Refer to ‘Programming the Action Codes’ page 20 and Table 1 page 25 for

further details.

Exit Facility

The Exit facility enables the lock release to be operated directly from a

push-button for the predetermined lock duration. Typically this would be used

to allow personnel to freely exit through the controlled door. The facility may

also be used for a Fireman’s’ key-switch, or to interface with other security

products such as a Door Entry Telephone System.

Lock Delay

If required, the lock release can be programmed to operate after a preset time

delay, following entry of the access code. This function is useful if the keypad

is located a significant distance from the entrance.

Non-Volatile Memory

The access codes and user programs are stored in a protected non-volatile

EEPROM memory, which does not rely on batteries. The access codes and

other programmable parameters are retained indefinitely without power

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Brak uwag

Bell System BL106 Instrukcja Użytkownika Strona 7